Dimâge Scan Dual II 17
then click on Next.
8. Click on Browse to select another
destination directory…
• An install directory and path can also be
entered directly into the install path list
box.
7. After reading the agreement, click on
Y
es.
• If you do not agree to the conditions stated
in the End-User License Agreement, click
on No and the software will not be
installed.
5. Select D:\Driver\English\Setup.exe
from the Open drop-down list, then
click on O
K.
• If your CD-ROM drive is not the D drive,
replace the D with the appropriate
designation for your CD-ROM drive.
INSTALLING THE SOFTWARE – WINDOWS
4. Select Run from the Start menu.
The Run dialog box will appear.
The Software License Agreement will appear.
The Choose Destination Location dialog box will appear.
6. Click on Next.
The installer flash will appear.
To Next Page
Loading...
