Dimâge Scan Dual II 19
INSTALLING THE SOFTWARE – MACINTOSH
1. Turn on the Dimâge Scan Dual2, then turn on your
Macintosh.
2. Quit any open applications.
3. Insert the Dimâge Scan Dual2 CD-ROM into the
CD-ROM drive.
• will appear on the desktop.
4. Double-click on .
• The driver folders will appear.
7. Click on .
8. Click on .
• If you do not agree to the conditions
stated in the End-User License
Agreement, click on Decline and the
software will not be installed.
The End-User License Agreement will appear.
6. Open the English language folder, then double
click on the Dimâge Scan Dual2 Installer.
• The installer’s start-up screen will appear.
Please remove or disable any antivirus system extensions before launching this
installer. These extensions may conflict with the operation of this installer.
Replace or re-enable them when installation is complete. Hold the shift key down
during startup to disable the extensions.
5. Double-click on Driver folder.
• The language folders will appear.
To Next Page
Loading...
