78
SNAPSHOT
When the Snapshot button is clicked, the current prescan image is stored in the Snapshot
Display Area temporarily and displayed as a thumbnail.
When the thumbnail in the Snapshot Display Area is double-clicked, that image is displayed in
the Prescan tab.
This is convenient when storing the image correction temporarily while processing, or when
correcting the image again after going back to a certain step.
Storing in the Snapshot Display Area temporarily
1. Click on .
• The displayed prescan image is displayed in the Snapshot
Display Area as a temporary storing place.
Displaying the image stored temporarily as a prescan image
1. Click on the thumbnail in the Snapshot Display Area.
• The displayed prescan image is deleted and the thumbnail image is
displayed as a prescan image.
Snapshot Display Area 1
Snapshot Display Area 2
To Next Page
Loading...
