Dimâge Scan Dual II 57
AE AREA LOCK
The AE area in auto exposure adjusting mode can be changed and the exposure of that area
is adjusted automatically.
Perform the procedure below after prescanning the image.
2. Press the Shift key.
• The AE area is indicated by a line instead of the cropping
area indicated by a dashed line.
3. While pressing down the Shift key, change the AE
area.
• The operation is the same as that of changing the
cropping area except that the shift key should be used.
• For details, see “Cropping” (see page 60).
1. Click on .
To Next Page
Loading...
