Dimâge Scan Dual II 77
Saturation Correction
The 2 images of which saturation has been corrected on the
right and left sides of the center image are displayed . The
variation image on the left side shows reduced saturation, and
on the right side shows increased saturation.
1. Click the image in the direction you
want to correct from the 2 frames of
the images except for the image in
center.
• The image you clicked is placed in center
and 2 new frames of the variation images
that have been corrected in each direction
are displayed.
2. Correct the image properly by repeating the
operation in step 1.
VARIATION CORRECTION
Changing the Amount of Correction Step
The amount of correction step can be changed by moving the
Variation Amount Control slider. The desired amount can also
be input in the text box.
Reset
If you click the Reset button, the settings in the current
correction window are reset.
To Next Page
Loading...
Need help?
General
