left
Module: Q:\Products\Minolta\e\EP1030\OM\00-gb\Gb\CHAPTER2.GB Page 8 of 14
Text produced for: User Manual EP1030/1030F first page in draft 5
2.1 Copier Parts and their Operation
EP1030/EP1030F 8 Rev. 1.x/22.05.02
2.1 Copier Parts and their Operation
Outside the Copier
Pos. Specification Description
1 Copy Tray Holds the copies fed out of the copier.
2 Main Switch Use to turn on and off the copier.
(See page 12.)
3 Control Panel Use to make various copy job settings and
start a copy cycle.(See page 11.)
4 Front Door Open only for the following:
Replenish toner (See page 43.)
Remove a paper misfeed (See page 56.)
5 Manual Bypass Tray Single sheet of plain paper, thick paper,
transparencies and other special materials
can be placed here. (See page 24.)
6 Right Door Open to clear a paper misfeed.
7 Drawer Holds up to 250 sheets of copy paper.
1
2
3
4
5
6
7
To Next Page
Loading...
