Minolta EP1030 - Copier Specifications; EP1030;EP1030 F, EP1031;EP1031 F Specifications

left
Module: Q:\Products\Minolta\e\EP1030\OM\00-gb\Gb\CHAPTER4.GB Page 34 of 38
Text produced for: User Manual EP1030/1030F first page in draft 19
4.4 Default Manual Exposure Level Adjustment
EP1030/EP1030F 34 Rev. 1.x/22.05.02
4.4 Default Manual Exposure Level Adjustment
The center density setting of the Default Manual Exposure Level
Adjustment can be set to one of nine settings. With copy density 5 as the
middle setting, decreasing the setting value lightens the density and
increasing the setting value darkens the density.
1
Use the main switch to turn off
the copier. While holding down
the Exposure Control Key 5,
turn on the copier. The copier
enters the Default Manual
Exposure Level Adjustment.
2
Press the Exposure Control
Keys 4 and 6 to select a
density setting.
3
Press the Start Key to print one
copy in order to check the
selected density.
Copy density 1 (lightest)
Copy density 2 (lighter)
Copy density 3 (lighter)
Copy density 4 (lighter)
Copy density 5 - middle setting
Copy density 6 (darker)
Copy density 7 (darker)
Copy density 8 (darker)
Copy density 9 (darkest)