left
Module: Q:\Products\Minolta\e\EP1030\OM\00-gb\Gb\CHAPTER3.GB Page 18 of 26
Text produced for: User Manual EP1030/1030F first page in draft 11
3.2 Positioning the Original
EP1030/EP1030F 18 Rev. 1.x/22.05.02
3.2 Positioning the Original
3.2.1 Positioning on the Glass
Different methods of positioning the original will be used, depending on its
type.
Paper Originals
(The original is plain or thick paper.)
1
Raise the original cover.
2
Place the original face down on
the glass.
3
Align the center of the original
with the f marker on the scale
provided.
4
Gently lower the original cover.