Minolta EP1030 - Electrical and Image Adjustments; Adjustment of Maximum Exposure Lamp Voltage for Manual Mode

right
Module: Q:\Products\Minolta\e\EP1030\OM\00-gb\Gb\CHAPTER3.GB Page 17 of 26
Text produced for: User Manual EP1030/1030F first page in draft 11
3.1 Making Copies
Rev. 1.x/22.05.02 17 EP1030/EP1030F
Chapter 3
4
Set the number of copies to be
made.
Use the Copy Quantity keys to
set the number of copies to be
made. (See page 21.)
* If the original has been placed in
the Semi-automatic Document
Handler (SDH), the display will
automatically show the
number "1".
* To clear a wrong setting, press
the Clear/Stop Key and then
make the setting once again.
5
Press the Start Key.
Press the start key and copying
will begin.
* Press the Clear/Stop Key to
interrupt continuous
copying.Copying will
automatically stop.