Minolta EP1030 - Copier Does Not Work Properly

left
Module: Q:\Products\Minolta\e\EP1030\OM\00-gb\Gb\CHAPTER6.GB Page 64 of 64
Text produced for: User Manual EP1030/1030F first page in draft 41
6.2 Copier Does Not Work Properly
EP1030/1030F 64 Rev. 1.x/22.05.02
6.2 Copier Does Not Work Properly
* If the above steps do not correct the problem with the copier, turn the
Main Switch off, unplug the cord and contact your service
representative.
Problem Cause Correction
Nothing
displayed on the
Control Panel.
TheAutoPowerOff
function has been
activated.
Press the Main Switch to
turn the copier on.
Copying does
not start when
the Start Key is
pressed.
Is the LED in the Start
Key off?
The Copier is still warming
up. Wait a moment.
Isthereanerror
display (J/E/C) on the
Control Panel?
Take the necessary action
to correct the error
displayed. (See page 40.)
No power to the
copier.
Is the Front Door
closed?
Make sure the Front Door
is securely closed.
Is the copier plugged
in?
Make sure the plug is
securely in the outlet.
Has a breaker in the
power supply gone
off?
Reset the breaker.