Minolta EP1030 - Adjustment of SDH Reference Position (EP1030 F;EP1031 F Only); SDH Position and Registration Adjustments; Adjustment of SDH Leading Edge Registration (EP1030 F;EP1031 F Only)

left
Module: Q:\Products\Minolta\e\EP1030\OM\00-gb\Gb\CHAPTER4.GB Page 28 of 38
Text produced for: User Manual EP1030/1030F first page in draft 19
4.1 Toner Replenisher
EP1030/EP1030F 28 Rev. 1.x/22.05.02
4.1 Toner Replenisher
Toner Replenisher Function
When many copies are made of an original that has a large amount of
black area (such as a photograph), the copier can rapidly exhaust the
supply of toner available. As a result, the image density of the copies will
become lighter. In such a case, use the Toner Replenisher function to
regain the normal image density quickly.
1
Check that the copier is in the
initial mode.
2
TurntheMainSwitchoff.While
pressing the Clear/Stop Key,
turn the Main Switch on.
After the copier is warmed up,
the toner begins to be supplied.
Original Copy