left
Module: Q:\Products\Minolta\e\EP1030\OM\00-gb\Gb\CHAPTER4.GB Page 38 of 38
Text produced for: User Manual EP1030/1030F first page in draft 19
4.6 Total Count Function
EP1030/EP1030F 38 Rev. 1.x/22.05.02
4.6 Total Count Function
The total number of copies made from the time the copier was installed
can be checked. The following two totals are provided.
Total Count
Shows the total number of copies since the copier was installed.
IU Count
Shows the total number of copies for the current imaging cartridge.
4.6.1 Counter Display
The totals are shown in the Display Panel on the Control Panel.
Checking Total Copies/IU Count
1
Press the Clear/Stop Key for
three seconds.
* The total count will appear.
Continue to hold the key down
for another three seconds (a
total of six seconds) and the IU
count will appear.
2
Press the Clear/Stop Key to exit the counter display.
•
•
•
• •
•
Example: Total of 12,345 copies
* Displayed two digits at a time.
Example: The IU count is 1,234 copies.