Minolta EP1030 - Toner Control and Drum Charging; Drum Charging System

left
Module: Q:\Products\Minolta\e\EP1030\OM\00-gb\Gb\CHAPTER5.GB Page 48 of 60
Text produced for: User Manual EP1030/1030F first page in draft 27
5.4 B Imaging Unit Indicator
EP1030/EP1030F 48 Rev. 1.x/22.05.02
Installing the Imaging Unit
1
Remove the imaging unit from
its box.
NOTE
Do not touch or scratch the PC Drum.
2
Remove the imaging unit from
its package. Remove the tape
and packing material.
NOTE
Do not touch or scratch the PC Drum.
3
Open the cartridge holder and
remove the starter cartridge.
The arrows on the starter
cartridge a and the upper edge
of the cartridge holdershouldbe
aligned at removal.
4
Hold the starter cartridge with
the tab up and shake it well.