left
Module: Q:\Products\Minolta\e\EP1030\OM\00-gb\Gb\CHAPTER3.GB Page 26 of 26
Text produced for: User Manual EP1030/1030F first page in draft 11
3.6 Hints for Advanced Copying
EP1030/EP1030F 26 Rev. 1.x/22.05.02
1
Composite copying puts
information from two different
originals together on one copy.
First, make a copy from the first
original. Then place the second
original in the same direction as
the first one.
2
Pick up the copy of the first
original fed out onto the Copy
Tray and, holding it just as it has
been fed out, insert it into the
Multi Bypass port.
NOTE
Only plain paper can be used for making two-sided and composite
copies. (No transparencies can be used.)
If the paper is curled, remove the curl before inserting the paper into
the copier.
1
st
Original 2
nd
Original
To Next Page
Loading...
