left
Module: Q:\Products\Minolta\e\EP1030\OM\00-gb\Gb\CHAPTER5.GB Page 56 of 60
Text produced for: User Manual EP1030/1030F first page in draft 27
5.6 J-Display
EP1030/EP1030F 56 Rev. 1.x/22.05.02
5.6.1 Removing a Paper Misfeed
J2/J3-Copier
NOTE
Be careful not to touch the areas marked with [#High Voltage] and
[!Caution: Hot].
1
Open the Front Door. While
pressing with one hand on the
area marked with h , turn the
Lock Release Lever clockwise
to swing up the Upper Unit.
2
While holding up the fusing unit
cover on this side, remove the
paper.
CAUTION HOT
The fusing unit and its surrounding areas may be extremely hot. DO NOT
TOUCH any area except the black cover for the fusing unit.
3
Remove any paper misfeed in
the transfer area.
To Next Page
Loading...
