Minolta EP1030 - Optical Path Adjustments; Adjustment of the Aperture Blades; Adjustment of Zoom Ratio in Crosswise Direction (EP1031;EP1031 F Only)

left
Module: Q:\Products\Minolta\e\EP1030\OM\00-gb\Gb\CHAPTER3.GB Page 20 of 26
Text produced for: User Manual EP1030/1030F first page in draft 11
3.2 Positioning the Original
EP1030/EP1030F 20 Rev. 1.x/22.05.02
Positioning the Original
1
Adjust the Document Guide
Plates to match the size of the
original.
2
The original is placed faced
down on the Document Feed
Tray. The SDH indicator will
come on indicating SDH mode
and the Display Panel will
automatically show a "1".
3
NOTE
 Size and number of originals: A4 or Letter, up to 50 sheets.
 Never exceed the b mark indicating maximum capacity.
 Always align the Guide Plates so that they touch the originals. Failure
to do so may cause the originals to be fed into the copier at an angle.