right
Module: Q:\Products\Minolta\e\EP1030\OM\00-gb\Gb\CHAPTER5.GB Page 53 of 60
Text produced for: User Manual EP1030/1030F first page in draft 27
5.5 E-Display
Rev. 1.x/22.05.02 53 EP1030/EP1030F
Chapter 5
5.5 E-Display
This display indicates that there is trouble during the charging process.
Copying cannot be performed at this time. Follow the procedure below to
reset the copier.
Resetting the Copier
1
Turn the Main Switch off and
then on to reset the copier.
If the "E" appears again, contact
your service representative.
Before Calling Your Service Representative
Before calling the service representative, note the code being displayed.
Example: E2
Once the service representative has been contacted, turn the Main Switch
off and unplug the power cord.
Flashes alternately.
To Next Page
Loading...
