Rev.3.3 User Manual Page 11 of 299
6.2 Self–measuring of PEF and FEV1 value
Please read all the information in this user manual before using this device. if you do not understand
these instructions or if you have questions about your peak flow and fev1 meter and its use consult
your physician or other licensed healthcare professional.
if you do not understand the instructions:
USA:
call mir usa 1-844-4mirusa (1-844-464-7872), monday to friday 8 am to 5 pm (central time), or
contact us at mirusa@spirometry.com, or write us at MIR - Medical International Research USA, Inc,
5462 S. Westridge Drive New Berlin, WI 53151 – USA.
Europe and worldwide:call mir +39 06 22754777, monday to friday 8 am to 5 pm (gmt+1), or contact
us at mir@spirometry.com, or write us at mir via del maggiolino 125, 00155 roma, italy.
Ask your physician or other licensed health care professional to watch you use the peak flow meter.
this will help assure you are using it correctly.
No matter what your peak flow measures are, if you have signs and symptoms such as chest
tightness, shortness of breath, coughing or wheezing you should follow your licensed health care
professional's advice for contacting him or her.
if you are unable to obtain a reading you should contact your physician immediately.
SMART ONE must be cleaned as shown in CARE AND CEANING section before your initial trial and
periodically thereafter.
To carry out a measurement:
• Run the MIR SMART ONE APP on your smartphone
• Press the START icon
• Wait for Bluetooth connection
To Next Page
Loading...
