Rev.3.3 User Manual Page 18 of 299
After cleaning, insert the turbine into the socket in the direction indicated by the screen–printed
closed padlock symbol on the SMART ONE. To insert the turbine correctly, push it down and turn
clockwise until it stops; to make sure it is fully inserted into the plastic container.
8.2 Cleaning and disinfection of the mouthpiece
Make sure to clean the mouthpiece after each use. To clean the mouthpiece, simply pull it apart
from the turbine. Just as for the turbine, Immerse the mouthpiece in warmy soapy water and
agitate the mouthpiece for 2-3 minutes. Rinse in clean water and shake gently to remove any
excess water. Allow to air dry on a towel. Store in a clean, dry place in your home.
After cleaning, insert the mouthpiece in the turbine, by pressing lightly.
8.3 Cleaning of the device
Clean the device once a day. To clean, wipe the device’s surfaces with a soft damp cloth. Dry with
a soft cloth or allow to air dry. Ensure that all surfaces are completely dry.
Never put the device into water or other fluids.
8.4 Replacing batteries
The device continuously monitors the battery level. A message on the smartphone display alerts
the user when the device battery is low. On fully charged batteries, the device is expected to work
for 5 years or 1000 tests whichever comes first.
Used SMART ONE batteries should only be disposed of in special containers or preferably returned
to the dealer of the device or to a special collection centre. In any case, all applicable local
regulations must be complied with.
To Next Page
Loading...
