Mitsubishi Electric Melsec A Series - Page 15

I
•
1. INTRODUCTION
-------------------- MELSEC.A
(6) Connection with the MINI-53 link remote I/O modules and remote ter-
minal modules is possible.
The A2C can be connected with the MINI-53 link remote I/O modules,
remote terminal modules. (See Section 2.3.1.)
The
A2CI/0 modules, MINI-53 link remote I/O modules, remote terminal
modules can be used together.
"
A2CCPU
]1
~ Twisted-pair cable
1
Remote terminal
I
module
II
A2CI/O module
JI
II
A2CI/O module
11
Remote I/O module
Fig. 1.5 Use with the MINI·53 Link Modules
(7) Vertical and horizontal positions and mounting on a flat base are
possible.
The A2C and
A2CI/0 modules can be installed in three different posi-
tions.
0
Front
-
r-'-
1
-
~
=
= 0
0
~
~
111111
Vertical Horizontal
;:;
FI~t b'-sO / // ~
Fig. 1.6 Installing Positions of the A2C and A2CI/O Modules
1-7