19
CHAPTER 1 A/D CONVERTER MODULE
1
1.2 Features
(9) Various installation methods
The module can be installed in six directions using a DIN rail.
(10)Easy module replacement
The terminal block for module power supply and FG, and the terminal block for analog input signals have a two-
piece structure, where the module can be replaced with the wire connected. In addition, the terminal block for
analog input signals has a lift-up structure, where the terminal block lifts only by loosening the terminal block
mounting screw, enabling it to be removed easily.
(11)Check on the error history
The history of the last 15 errors and occurrence time is stored in the main A/D converter module.
Checking the error information of the past helps to identify the cause at the time of a trouble.
(12)Easy settings by CC IE Field configuration of the engineering tool
The CC IE Field configuration of the engineering tool makes it possible to set parameters on its window, thereby
reducing the programs. In addition, the setting status and the operating status of modules can be checked easily.
Downward installation
DIN rail
Vertical installation Horizontal installation Horizontal installation
(upside down)
Upward installation
To Next Page
Loading...
