Mitsubishi Electric NZ2EX2B-60AD4 - Programming Procedure; Program Example

156
9.2 Programming Procedure
Create a program to execute A/D conversion as illustrated by the following procedure.
9.3 Program Example
(1) System configuration
● For the settings using the engineering tool, the procedure is described based on the use of GX Works2.
Start creating a program.
Finish creating a program.
Parameter settings
Error reset program
Sub-program
*1
*1 Program to be added according to
the control objects (Create it as necessary.)
Main A/D converter module
(NZ2GF2BN-60AD4)
Extension A/D converter module
(NZ2EX2B-60AD4)
Master station
(station No.0)
00 to 1F 20 to 2F
Analog input
(CH1 to CH3)
Analog input
(CH1 to CH4)
Remote device station
(station No.1)
Power supply module (Q62P)
CPU module (Q10UDHCPU)
Master/local module (QJ71GF11-T2)
Input module (QX10)