Mitsubishi Electric NZ2EX2B-60AD4 - Page 159

157
CHAPTER 9 PROGRAMMING
9
9.3 Program Example
(a) Assignment of link devices
(2) Programming conditions
Here is the programming conditions:
• Digital operation values resulting from A/D conversion of CH1 to CH3 of the main A/D converter module are
read out to the master station. A/D conversion takes place at the time of sampling processing for CH1,
averaging processing every 50 times for CH2, and every 10 moving averages for CH3.
• Digital operation values resulting from A/D conversion of CH1 to CH4 of the extension A/D converter module
are read out to the master station. A/D conversion takes place at the time of sampling processing for CH1
and CH4, averaging processing every 50 times for CH2, and every 10 moving averages for CH3.
Master station (station No.0)
CPU module
X1000
to to to
to to to
to to to
to to to to
to to to
to to to to
to to to to
to to to to
X101F
X
X1020
X102F
Y1000
Y101F
Y
Y1020
Y102F
W1000
W100F
W
W1010
W101F
W1100
W110F
W
W1110
W111F
Master/local module
RX00
RX1F
RX
RX20
RX2F
RY00
RY1F
RY
RY20
RY2F
RWw0
RWwF
RWw
RWw10
RWw1F
RWr0
RWrF
RWr
RWr10
RWr1F
Remote device station (station No.1)
Main A/D
converter module
RX
Extension A/D
converter module
RX00
RX1F
RX
RX20
RX2F
RY00
RY1F
RY
RY20
RY2F
RWw0
RWwF RWw
RWw10
RWw1F
RWr0
RWrF
RWr
RWr10
RWr1F
RY
RWw
RWr
RX20
RX2F
RY20
RY2F
RWw10
RWw1F
RWr10
RWr1F