Mitsubishi Electric NZ2EX2B-60AD4 - List of Remote Buffer Memory Areas

38
3.7 List of Remote Buffer Memory Areas
This section lists the remote buffer memory areas of the A/D converter module.
The remote buffer memory areas of the main module and extension module are assigned as shown below.
Ex.
How the individual areas of remote buffer memory are shown in the manual
For details on the remote buffer memory, refer to the following:
• Page 205, Appendix 3
: Access permitted, : Access not permitted
*1 For the REMFR and REMTO instructions, refer to the following:
 User's manual for the master/local module used
*2 For the access method, refer to the following:
• Parameter area ( Page 69, Section 7.1)
• Error history area ( Page 168, Section 11.1)
Remote buffer memory address
Area Target
Access method
Decimal Hexadecimal
CC IE Field
configuration of
the engineering
tool
REMFR
instruction,
REMTO
instruction
*1
0 to 255 0000H to 00FFH
Parameter area
Station-based parameter data

*2

256 to 511 0100H to 01FFH
Module-based
parameter data
Main module
512 to 767 0200H to 02FFH Extension module 1
768 to 1279 0300H to 04FFH System area
1280 to 1535 0500H to 05FFH
Monitor area
Station-based monitor data

1536 to 1791 0600H to 06FFH
Module-based monitor
data
Main module
1792 to 2047 0700H to 07FFH Extension module 1
2048 to 2559 0800H to 09FFH System area
2560 to 4095 0A00H to 0FFFH Error history area Station-based error history data

*2

4096 to 4351 1000H to 10FFH
Module control data
area
Station-based control data

4352 to 4607 1100H to 11FFH
Module-based control
data
Main module
4608 to 4863 1200H to 12FFH Extension module 1
4864 to 5375 1300H to 14FFH System area
Main A/D converter module Extension module
Setting item
A/D conversion enable/disable setting (address: 0102H, 0202H)
Address of the extension A/D converter module
Address of the main A/D converter module
Setting item
Mode switch (address: 0000H)
Address of the main A/D converter module