31
CHAPTER 3 SPECIFICATIONS
3
3.4 Function List
*1 "Main" and "Extension" indicate the following modules, respectively:
Main: Main A/D converter module
Extension: Extension A/D converter module
*2 The extension A/D converter module does not support user range.
Difference conversion function
Subtracts the difference conversion reference value
from a digital operation value and stores the obtained
value into the remote register.
Page 122, Section 8.14
Trigger conversion function
Provides A/D conversion in accordance with the input
of Trigger conversion request.
Page 127, Section 8.15
Trigger conversion request that is input to the
extension input module via an external device also
allows A/D conversion.
CC-Link IE Field Network synchronous
communication function
Performs A/D conversion with a synchronization
period of the master station that supports the CC-Link
IE Field Network synchronous communication
function. This makes it possible to synchronize the
operation with other slave stations sharing the same
network.
Page 135, Section 8.16
Error notification function
Notifies an error to the master station by the remote
input signal if a moderate error or a major error occurs
in the A/D converter module.
Page 142, Section 8.17
Functions with an extension I/O module
connected
The main A/D converter module permits the
connection of one extension I/O module.
• With an extension input module connected, remote
output signals of the main A/D converter module can
be assigned to remote input signals of the extension
input module connected.
• With an extension output module connected, remote
input signals of the main A/D converter module can
be assigned to remote output signals of the
extension output module connected.
Functions unique to an extension I/O module can also
be used.
Page 145, Section 8.18.1
Functions with an extension analog
module connected
The main A/D converter module permits the
connection of one extension A/D converter module.
With the extension A/D converter module connected,
A/D conversion processing of up to eight channels is
possible.
Page 150, Section 8.18.2
The main A/D converter module permits the
connection of one extension D/A converter module.
With the extension D/A converter module connected,
A/D conversion processing of four channels and D/A
conversion processing of four channels is possible.
Page 151, Section 8.18.3
CC-Link IE Field Network diagnostic
function
Allows the presence or absence of a network error to
be checked by accessing the engineering tool
connected to the CPU module.
Page 152, Section 8.19
Item Description
Available or not
Reference
Main
*1
Extension
*1
To Next Page
Loading...
