8 - 20
CHAPTER8 PARAMETERS
1
2
3
4
5
6
7
8
8.1 PLC Parameters
8.1.2 High Performance model QCPU, Process CPU, and Redundant CPU
(7) Program
File names and execution types (execution conditions) are set for each program when two or more programs are
written to the CPU module.
Figure 8.18 Program
Table8.18 Program setting list
Item
Parameter
No.
Description Setting range Default Reference
Program setting 7000
H
When writing two or more programs to
the CPU module, set a file name and
execution type (execution condition) of
each program.
Also, set a fixed scan interval
(execution interval of the fixed scan
execution type program).
Program name
Execute type (fixed scan interval
when the fixed scan execution is
selected)
File usability setting
I/O refresh setting
Blank Section 2.3
To Next Page
Loading...
Need help?
General
