Mitsubishi 00JCPU User Manual

APPX - 3
(To the next page)
TableAPPX.1 List of parameter numbers (continued)
Item Parameter No. Reference
Refresh parameters 5NM1H
Section 8.3
Common parameters 5NM2
H
Station inherent parameters 5NM3H
Sub-master parameters 5NM5H
Common parameters 2 5NMAH
Station inherent parameters 2
5NMB
H
Interrupt settings
Program 7000
H Section 2.3, Section 8.1
Boot option
Clear program memory
7000
H Section 5.2.8, Section 8.1
Auto Download all Data from Memory card to Standard
ROM
Boot file setting
SFC program start mode 8002
H
Section 8.1Start conditions 8003H
Output mode when the block is stopped 8006H
Number of modules on Ethernet 9000H
Section 8.3
Starting I/O No.
9N00
H
Network No.
Group No.
Station No.
Operational settings
Initial settings 9N01
H
Open settings 9N02H
Router relay parameter 9N03H
Station No.<->IP information 9N05H
FTP Parameters 9N06H
E-mail settings 9N07H
News setting 9N08H
Interrupt settings 9N09H
Routing parameters 9N04H
Number of modules on CC-Link IE Controller Network A000H
Section 8.3
Interlink transmission parameters A002
H
Starting I/O No.
ANM0
H
Network No.
Total stations
Station No.
Mode ANM0
H
Refresh parameters ANM1H
Common parameters ANM2H
Station inherent parameters ANM3H

Mitsubishi 00JCPU Specifications

General

Brand	Mitsubishi
Model	00JCPU
Category	Controller
Language	English