Mitsubishi AL2 Series User Manual

α2 Simple Application Controllers
Function Blocks 6
6 - 79
6.33 Control Display Manager
Display Manager controls the sequence of user screens to be displayed according to the
signal that specifies each user screens. When N04 has been turned ON, Display Manager
becomes effective. The user screen set with Display Manager is displayed on the
α2 series.
The displayed user screen can be composed up to 10 Display function blocks.
However, the Display Manager can only be set using a combination of an
α2 Series
Controller and the Al-PCS/WIN-E Vr 2.00. The Control Display Manager cannot be
programmed using the controller alone.
.
Insert CDP function block area
Add DP function block area

Mitsubishi AL2 Series Specifications

General

Model	AL2 Series
Digital Inputs	Yes
Digital Outputs	Yes
Type	PLC
Manufacturer	Mitsubishi
Input Voltage	100 to 240 VAC or 24 VDC (depending on model)
Output Voltage	24V DC
Number of Inputs	8 to 64 (depending on model)
Number of Outputs	6 to 64 (depending on model)
Programming Language	Ladder Diagram
Communication Ports	RS-232, RS-485, Ethernet (depending on model)
Operating Temperature	0 to +55°C
Storage Temperature	-20°C to 70°C
Humidity	10% to 90% (non-condensing)
Weight	Varies depending on the model