Mitsubishi AL2 Series User Manual

α2 Simple Application Controllers
System Menu 3
3 - 17
To Remove the “ProtectSW” Feature:
1 ) Install the AL2-EEPROM-2. Refer to the AL2-EEPROM-2 instruction manual.
2 ) Select “Others” in the Top Menu.
3 ) Select “ProgTran.”
4 ) Select “ProtectSW”.
5 ) Choose “Off“ to de-activate the feature.
3.7 LCD Displays
There are a number of types of data and/or information that can be displayed on the LCD
display besides the menus listed previously.
3.7.1 Image Table
The first LCD display to appear is the Input/Output image table and the Real Time Clock. The
clock shows the current time as Set by the User. The Summertime mode is shown by an “s”
preceding the time if activated.
3.7.2 LCD Function
Display up to 12 different letters or characters on each of four lines. Options include character
strings (design your own message), function block data, or analog data.

Mitsubishi AL2 Series Specifications

General

Model	AL2 Series
Digital Inputs	Yes
Digital Outputs	Yes
Type	PLC
Manufacturer	Mitsubishi
Input Voltage	100 to 240 VAC or 24 VDC (depending on model)
Output Voltage	24V DC
Number of Inputs	8 to 64 (depending on model)
Number of Outputs	6 to 64 (depending on model)
Programming Language	Ladder Diagram
Communication Ports	RS-232, RS-485, Ethernet (depending on model)
Operating Temperature	0 to +55°C
Storage Temperature	-20°C to 70°C
Humidity	10% to 90% (non-condensing)
Weight	Varies depending on the model