Mitsubishi AL2 Series User Manual

α2 Simple Application Controllers
Function Blocks 6
6 - 19
3 ) Time control action
Setup of the Flicker Function Block directly from the
α2 Series Controller
1 ) Allocate the input pin to be used for the function block.
2 ) Press the “OK” key with the cursor in the function block. The function block edit screen is
displayed as shown.
3 ) Press the “OK” key to set the Time unit for the delayed output.
4 ) Press the “OK” key having selected the value for the flicker time unit and return to the func-
tion block edit screen. Using the “ and ” keys highlight the Setup FB and press the “OK”
key. The screen displayed is shown.
5 ) Select the On Time, Off Time or Period option using the “ and ” Keys and press the
“OK” key. The On Time can be entered using the “+” or “-” keys.
6 ) The OffTime can be entered using the “+” or “-” keys.
7 ) The Period can be entered using the “ and ” Keys.
Input pin I
Output
ON OFF
On time
Off time
On time
Off time
registered number of times
On time On time
registered number of times
B001 : FL
Se t up FB
Cha nge No
De l e t e FB
Time uni t
Time uni t
100 sm
10 ms
1s
B001 : FL
OnT i me
Of f
Time
Pe r i od
B001 : FL
T= 0 . 1s
t= 0.0s
OnT i me
B001 : FL
T= 0 . 1s
t= 0.0s
Of f Time
B001 : FL
Time
Cou
nt
Con t i nuou

Mitsubishi AL2 Series Specifications

General

Model	AL2 Series
Digital Inputs	Yes
Digital Outputs	Yes
Type	PLC
Manufacturer	Mitsubishi
Input Voltage	100 to 240 VAC or 24 VDC (depending on model)
Output Voltage	24V DC
Number of Inputs	8 to 64 (depending on model)
Number of Outputs	6 to 64 (depending on model)
Programming Language	Ladder Diagram
Communication Ports	RS-232, RS-485, Ethernet (depending on model)
Operating Temperature	0 to +55°C
Storage Temperature	-20°C to 70°C
Humidity	10% to 90% (non-condensing)
Weight	Varies depending on the model