Mitsubishi MELSEC-A series User Manual

3. SPEClFlCAllONS /MELSEC=A
4) Processing will stop if interpolation (00) or independent
(1 1) operations have been called and the other axis is under
different control (e.g. zeroing jog operation or inching).
I*-) c 3rd point
X axis
Dwell Dwell I
-t
1 st point
kpp- -.+
Y axis busy -
Y-axis zeroing
start
and processing is stopped
buse
X axis is switched to 3rd point
Y axis is zeroing.
Fig. 3.34 Start Data Example 4
3-40
IB INAI €6101-A

Mitsubishi MELSEC-A series Specifications

General

Brand	Mitsubishi
Model	MELSEC-A series
Category	Controller
Language	English