Mitsubishi MELSEC-Q/L User Manual

598
PSTOP, PSTOPP
: Character string for the name of the program file to be set in the stand-by status or head number of the devices where the character string data is stored
(character string)
Function
(1) Places the file name program stored in the device designated by in the stand-by status.
(2) Only the programs stored in the drive No. 0 (program memory/internal RAM) can be set as the stand-by type.
(3) The specified program is placed in the stand-by status when END processing is performed.
(4) This instruction will be given priority even in cases when a program execution type has been designated in the
parameters.
(5) It is not necessary to designate the extension (.QPG) with the file name.
(Only .QPG files will be acted on.)
Operation Error
(1) In any of the following cases, an operation error occurs, the error flag (SM0) turns ON, and an error code is stored into
SD0.
Program Example
(1) The following program places the program with the file name ABC in the stand-by status when X0 goes ON.
[Ladder Mode] [List Mode]
7.17.1 PSTOP, PSTOPP Program stan dby
7.17.1 PSTOP, PSTOPP
Setting
Data
Internal Devices
R, ZR
J\
U\G
Zn
Constants
$
Other
Bit Word Bit Word
–– –– ––
Error
code
Error details
Q00J/
Q00/
Q01
QnH QnPH QnPRH QnU LCPU
2410
The program with the file name specified by does not exist.
––
2412
The program type of the file name specified by is the SFC program.
––
4101
The range of the device specified by exceeds the range of the
corresponding device.
––
Process
High
performance
Redundant Universal LCPU
Basic
Command
Command
PSTOP
PSTOPP
S
S
PSTOP
PSTOPP
S
S
S
S
S
S
Step Instruction Device

Mitsubishi MELSEC-Q/L Specifications

General

Brand	Mitsubishi
Model	MELSEC-Q/L
Category	Controller
Language	English