Mitsubishi MELSEC-Q/L

624
TYPERD, TYPERDP
• When the target module occupies two slots
The start I/O number to be specified may differ from that of the target module.
For the start I/O number, refer to the manual of each module.
QJ71GP21S-SX
• Specify a value that is the sum of the start I/O number of the mounted module and 0010
H
.
• When the target module is a CPU module in multiple CPU systems
Specify the value obtained by dividing the start I/O number of the target CPU module by 16.
Or, the model name can be read by specifying the start I/O number of a module controlled by another CPU.
(3) +0 and +1 to +9 store the execution result of the instruction and module model name, respectively.
A value stored in is as follows:
(a) When the model name has been written to the target module (example: QJ71GP21-SX)
The following table shows the examples of model names stored in +1 to +9.
Target module Stored model name
CPU module Q06UDEHCPU
Intelligent function module QJ71GP21-SX
GOT GOT1000
Example
Power
supply
module
CPU
module
QJ71G P21S-SX Empty Empty Empty Empty Empty Empty
3E00
H 0000H 0010H 0030H 0040H 0050H 0060H 0070H 0080H
Start I/O number configured in
the I/O assignment setting
Specify K1 or H1 as the start I/O number to be read.
Power
supply
module
CPU
module
Q20UDH
CPU
Q20UDH
CPU
Q20UDH
CPU
QY41
P
Q68
ADV
QY41
P
QY10 QY10
3E00
H 3E10H 3E20H 3E30H 0000H 0020H 0030H 0050H 0060H
Start I/O number configured in
the I/O assignment setting
Specify 3E3H as the start I/O number to be read.
D D D
D
4AH (J)
D
0
b15 to b8 b7 to b0
31
H (1)
50
H (P)
31
H (1)
53
H (S)
00
H
00H
00H
00H
00H
00H
00H
51H (Q)
Stores 0.
Stores the model name that has been
written to the target module
(stored in ASC II).
Stores the remaining model name and
00
H to the 12th to 17th devices and
the 18th device, respectively.
Indicates that the model name
that has been written to
the target module is stored.
37
H (7)
47
H (G)
32
H (2)
2D
H (-)
58
H (X)
+0
D
+1
D
+2
D
+3
D
+4
D
+5
D
+6
D
+7
D
+8
D
+9
Nine words are used.
D D