12 - 18
12. OVERVIEW OF PROCESSING PERFORMED BY THE QnACPU
(c) When grouping several interrupt programs into one
1) Create interrupt programs in order starting from step 0 in the standby type
program.
An END instruction is required at the end of the interrupt programs.
2) Since there are no restrictions on the order of creation of interrupt programs,
there is no need to arrange pointers in ascending order of pointer numbers
when creating multiple interrupt programs.
REMARK
For details on interrupt pointers, refer to the QnACPU Programming Manual
(Fundamentals).
To Next Page
Loading...
Need help?
General
