12 - 20
12. OVERVIEW OF PROCESSING PERFORMED BY THE QnACPU
2) When changing the execution type of another program from the scan
execution type program:
• In the scan execution type program in execution, the type of the program to
be executed next is changed from the standby type to the scan execution
type.
• The following shows the operation that the QnACPU switches the standby
type program "DEF" to the scan execution type, and the scan execution
program "ABC" to the standby type program when M0 in program "ABC"
turns on.
[Before execution of PSCAN and PSTOP instructions]
[After execution of PSCAN and PSTOP instructions]
To Next Page
Loading...
