Mitsubishi Q2ACPU User Manual

13 - 2
13. PARAMETER LIST
Setting
Reference Section/Reference Manual
Default value Setting range
––
Section 11.2
No setting Up to 10 characters
No setting Up to 64 characters
–– –
100ms 10ms to 1000ms (in 10ms units)
QnACPU Programming Manual (Fundamentals)
10ms 1ms to 100ms (in 1ms units)
No setting X0 to X1FFF Section 10.6.1, Section 10.6.3
Disabled Enabled/disabled Section 10.6.4
Before operation Before operation/After 1 scan Section 10.4
No setting P0 to P4095 QnACPU Programming Manual (Fundamentals)
1 module 1 to 6 modules Section 6.3
16 points 0 point to 64 points (in 16-point units) Section 5.3
No setting C0 to C65535
QnACPU Programming Manual (Fundamentals)
I28 100ms
I29 40ms
I30 20ms
I31 10ms
5ms to 1000ms (in 5ms units)
–– –
Not used
• Not used
• Use the same file name as the program.
• Use the following file.
QnACPU Programming Manual (Fundamentals)
Not used
• Not used
• Use the same file name as the program.
• Use the following file.
Section 11.5
Use the same file name as the
program.
• Not used
• Use the same file name as the program.
• Use the following file.
QnACPU Programming Manual (Fundamentals)
Not used
• Not used
• Use the following file.
QnACPU Programming Manual (Fundamentals)

Mitsubishi Q2ACPU Specifications

General

Brand	Mitsubishi
Model	Q2ACPU
Category	Controller
Language	English