13 - 10
13. PARAMETER LIST
* N and M indicate the following:
N:Number of the module counted from the first.
M:Network type M:Network type
Setting
Reference Section/Reference Manual
Default value Setting range
--
Chapter 7
-1 to 8
- 0000
H to 0FE0H
-
M: Master station/L: Local station/
T: Stand-by station
- X,M,L,B,T,ST,C,D,W,R,ZR
- Y,M,L,B,T,ST,C,D,W,R,ZR
- M,L,B,T,ST,C,D,W,R,ZR
- M,L,B,T,ST,C,D,W,R,ZR
- M,L,B,T,ST,C,D,W,R,ZR
- T,ST,C,D,W,R,ZR
-1 to 7
-1 to 10
- Not reserved/Reserved
- Continue/Stop
- Synchronization/Non-synchronization
-
1 to 100
(0 is invalid.)
-
Remote I/O station/Remote device station
/Intelligent device station
- 1 station/2 station/3 station/4 station
-
Specification of reserved station/Specification
of invalid station
M Network type M Network type
0H Master station) 4H MELSECNET (Master station)
1
H Local station) 5H MELSECNET II mixed (Master station)
2
H Standby master station 6H MELSECNET II (Master station)
3
H
MELSECNET/10
(Remote master station)