13 - 9
13. PARAMETER LIST
Item Parameter No Description
Network parametars Setting the CC-Link - Make the settings for automatic refresh of the CC-Link system.
Number of CC-Link C000
H Set the number of CC-Link master modules to be used.
CC-Link
detailed
settings
Master module head
I/O No
CNM2
H
Make the detailed setting required for automatic refresh of
the CC-LinkI system.
Module type
CNM1
H
Receiving data batch refresh
bit device
(Input data)
Transmission data batch
refresh bit device
(Output data)
Receiving data batch refresh
word device
(Remote device: RWr)
Transmission data batch
refresh device
(Remote device: RWw)
Batch refresh device for
special relay
Batch refresh device for
special register
Number of retries
CNM2
H
Number of automatic return
stations
Standby master staiton No.
PLC down select
Scan mode setting
Delay timer
Station
information
setting
Station type
Number of occupied stations
Specification of reserved
station/Specification of
invalid station
To Next Page
Loading...
