App - 36
APPENDICES
(16) Instructions for peripheral devices
(17) Program instructions
Classification Symbol Description
Input/output to
peripheral device
• Stores the message specified at (S) to the QnACPU.
This message is displayed at the peripheral device.
• Stores the data input from a peripheral device to the device specified
at (D).
Classification Symbol Description
Program execution
status switch
• Sets the specified program in the standby status.
• Turns OFF the coil of the specified program's OUT instruction and
sets the program to the standby status.
• Registers the specified program as a scan execution type program.
• Registers the specified program as a low-speed execution type
program.
To Next Page
Loading...
Need help?
General
