Mitsubishi Q2ACPU User Manual

App - 139
APPENDICES
40A0H
SFC device
designation
error
Out-of-range block No. is
designated.
Setting is incorrect.
Check and correct the set
contents.
40A1
H
Designation exceeds the range for
the number of blocks.
Setting is out of range. Check and correct the set number.
40A2
H
Out-of-range step No. is
designated.
Setting is incorrect.
Check and correct the set
contents.
40A3
H
Designation exceeds the range for
number of steps.
Setting is out of range. Check and correct the set number.
40A4
H
Out-of-range sequence step No. is
designated.
Setting is incorrect.
Check and correct the set
contents.
40A5
H
The designated device is out of
range.
Setting is out of range. Check and correct the set number.
40A6
H
The block designation pattern or
step designation pattern was
incorrect.
Setting is incorrect.
Check and correct the set
contents.
40B0
H
SFC file-
related error
The designated drive is incorrect. Setting is incorrect.
Check and correct the set
contents.
40B1
H
The designated program does not
exist.
The file name does not exist.
Check and correct the designated
file name.
40B2
H
The designated program was not
an SFC program.
This file cannot be handled.
Check and correct the designated
file name.
40B3
H
The SFC dedicated instruction
exists in the write during RUN
area.
Setting is incorrect.
Check and correct the set
contents.
4A00
H
Link-related
error
The designated station cannot be
accessed because no routing
parameters have been set to the
relevant station.
Routing parameter does not
exist.
Set the routing parameters for
accessing to the designated
station in the relevant station.
4A01
H
No network with the No. set in the
routing parameters exists.
The network I/O does not
exist.
Check and correct the routing
parameters set at the relevant
station.
4A02
H
Cannot access to the designated
station.
Link unit error.
Check if an error has occurred at
the network module/link module,
or if the online state has not been
established.
4B00
H
Target-
related error
An error occurred at the access
target station or the relay station.
The corresponding unit is
faulty.
Check and correct the error at the
designated access target station
or the relay station for the access
station.
Error Code
(Hexadecimal)
Error Error Contents
Message Displayed
at Peripheral Device
Corrective Action

Mitsubishi Q2ACPU Specifications

General

Brand	Mitsubishi
Model	Q2ACPU
Category	Controller
Language	English