Mitsubishi RC-EX3 Original Instructions

−15−
−14−
Select the unit of temperature
displayed on the R/C.
⑪
°C/°F
ºC / ºF
Back
Select the item.
Fan speed can be changed to
the selected one.
It may not be available to select
some of fan speeds depending
on indoor unit models.
⑫
Fan speed
Fan speed
Back
Select the item.
4-speed
3-speed
2-speed
（
Hi - Lo
）
2-speed
（
Hi - Me
）
1-speed
Set the range to apply the external input received through CNT of
either one IU to plural indoor units connected in one system
Individual
This is applied only to the IU receiving CNT input.
All units
This is applied to all indoor units connected.
⑬
External input
External input
Back
Select the item.
Individual
All units
Stop at xed position The
upper/lower ap can be set to
stop at one of four positions.
Stop at any position The
ap can be set to stop at any
position immediately after
operating the R/C switch.
⑭
Upper/lower ap control
Back
Select the item.
Upper/lower ap control
Stop at xed position
Stop at any position
Fixed position stop The
left/right ap can be set to stop
in eight different patterns.
Stop at any position The
ap can be set to stop at any
position immediately after
operating the R/C switch.
⑮
Left/right ap control
Left/right ap control
Back
Select the item.
Fixed position stop
Stop at any position
If the unit stops during operation,
Enable
It returns to the state before the power failure as soon as
the power supply is restored (After the end of the primary control at
the power on).
Disable
It stops after the restoration of power supply.
⑰
Auto-restart
Auto-restart
Back
Select the item.
Enable
Disable
Enable Auto can be selected
on the fan speed setting screen.
Disable
Auto selection
switch will not be displayed on
the fan speed setting screen.
Enable
Auto can be selected
on the room temperature setting
screen.
Disable
Auto selection
switch will not be displayed on
the room temperature setting
screen.
⑱
Auto temp setting
Auto temp setting
Back
Select the item.
Enable
Disable
⑲
Auto fan speed
Auto fan speed
Back
Select the item.
Enable
Disable
⑯
Ventilation setting
Ventilation setting
Back
Select the item.
Disable
Interlocking
Independent
Set this when a ventilation device is connected.
Disable No ventilation device is connected.
Interlocking Ventilation is interlocked with the Run/Stop of air
conditioner and operate the Ventilation output.
Independent If the ventilation is selected from the menu, only the
ventilation device is operated or stopped independently.

Mitsubishi RC-EX3 Specifications

General

Brand	Mitsubishi
Model	RC-EX3
Category	Remote Control
Language	English