Mitsubishi RC-EX3 Original Instructions

−35−
−34−
2
The Contrast Adjustment screen is
displayed.
Tap the “Contrast” on the Initial settings
menu screen. The contrast on the
screen changes by tapping the
Dark
or
Bright
button to select a
desired contrast.
3
Tap the
Set
button after the
setting.
4
Tap the
Adjust button to
display the Upper/Lower Contrast
screen.
5
The contrast of the lower half of the
screen changes when you tap the
Dark
/
Bright
button. Adjust the
contrast so that the upper and lower
halves of the screen match.
6
After you make the settings, tap the
Set
button.
[When the contrast differs between the top and bottom of the screen]
■Contrast
You can adjust the contrast of the LCD.
1
Tap the
Menu
button on the TOP screen and select
User setting ⇒ Initial settings ⇒ Contrast
.
Contrast
Back
Set
Adjust
Dark
Bright
Upper/Lower Contrast
Back
Set
Adjust contrast between upper and lower.
Dark
Bright
1
Tap the
Menu
button on the TOP screen and select
User setting ⇒ Initial settings ⇒ Backlight
.
3
Tap the
Set button after the setting.
2
The Backlight setting screen is displayed.
Tap the ON or OFF buttons for the backlight lighting and the lighting Period (5 - 90 sec, at 5-sec intervals).
ON
… The “Backlight” lights when the LCD is tapped.
If no operation is made for the set time, it turns off automatically.
OFF
… The “backlight” does not light even if the LCD is tapped.
■Backlight
You can turn ON/OFF the backlight and set the lighting period.
1
Tap the
Menu
button on the TOP screen and select
User setting ⇒ Initial settings ⇒ Controller sound
.
2
The Controller sound setting screen is displayed.
Tap ON or OFF for the controller sound.
ON
… When a button on the screen is tapped, a “beep” sounds.
OFF
… There is no beep.
■Controller sound
You can set to have the controller sound ON/OFF when the touch panel is operated.
Backlight
Back
Select the item.
Set
OFF
ON
Seconds
Controller sound
ON
OFF
Back
Select the item.
1
Tap the
Menu
button on the TOP screen and select
User setting ⇒ Initial settings ⇒ Operation lamp luminance
.
2
The Operation lamp luminance adjustment screen is displayed.
You can adjust the luminance of the operation lamp to a desired level by tapping the
▲ Light
/
▼ Dark
button.
3
After you make the settings, tap the
Set
button.
■Operation lamp luminance
You can adjust the operation lamp luminance.
Operation lamp luminance
Back
Use ▲▼ to adjust light and dark.
Set
▲
Light
▼
Dark

Mitsubishi RC-EX3 Specifications

General

Brand	Mitsubishi
Model	RC-EX3
Category	Remote Control
Language	English