How To Unpack the Type 670 Unit Cha
ter Two: Installation
22
Optional Equipment
•
670B-K1 Electrical Connector Accessories Kit (includes mating connectors for all the
electrical connectors)
•
CB270-2-x (where x is the cable length in ft.) cable to connect the pressure transducer to
the 670 instrument
•
Serial Interface Cable to communicate with a computer equipped with RS-232 software
Refer to Table 6, page 24, for a description of RS-232 cables.
•
IEEE-488 cable to connect the 670 unit to a computer equipped with IEEE-488 software
Refer to Table 6, page 24, for a description of IEEE-488 cables available.
•
RM-6 Rack Mount to mount the 670 unit in a full 19” rack
Cabling for use with a 274 multiplexer
•
Additional CB270-2-x (where x is the cable length in ft.) cables for each transducer (plus
one to connect the 670 to the 274 unit)
•
CB670-1 or CB670-2 cable to connect the 670 instrument to a 274 multiplexer (use the
CB670-2 if you need to access the trip point relays and latching, remote zero, or remote
range select)
600 Series High Accuracy Baratron transducers:
•
698 Differential Transducer (regulated at 45° C)
•
690 Absolute Transducer (regulated at 45° C)
•
617 Bakeable Absolute Transducer
•
616 Bakeable Differential Transducer
•
615 Bakeable Absolute Transducer
•
590 Absolute Transducer (regulated at 70° C)
300 Series High Accuracy Baratron transducers:
•
398 Differential Transducer
•
391 Differential Transducer
•
390 Absolute Transducer
•
370 Absolute or Differential Transducer
•
317 Bakeable Absolute Transducer
•
315 Bakeable Absolute or Differential Transducer
•
310 Absolute or Differential Transducer
The full scale range of the pressure transducers can vary from 0.1 to 25K Torr.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...