20
M26 Camera Manual: Product Overview
1.5 Available Accessories
1.5.1 Lens Cover with Glass Pane
Order no.: MX-M26-OPT-LCSG
As an additional accessory, the M26 with standard lens
(M14 thread) can be supplied with a protective cover
that has a glass pane instead of one made of plastic.
This will improve the durability of the lens cover when
used in extremely rough conditions (at sea, in sand
storms, etc.). This lens cover also has a thread size
that ts external lters (40.5 mm x 0.5 mm) available
from photo shops. For example, you could install a
polarization lter to cancel out the reections from
windowpanes or windshields. Using this lens cover
together with the B036/B041 Super Wide Angle lenses
is not recommended, since this lens cover produces
shadows at the image borders. The (longer) cover sup-
plied with M26 models with the CSVario lens is equipped
with the glass pane as standard.
1.5.2 Pole Mount
Order no.: MX-MH-SecureFlex-ESWS
If you are intending to mount the camera to a pole,
you should consider using the MOBOTIX Pole Mount
for M26 cameras. This mount is made of 3 mm pow
-
der-coated stainless steel (white) and has been designed
specically for outdoor use. The supplied stainless steel
straps allow the mount to be attached to poles with
diameters between 60 mm and 180 mm (2.4 in to 7.1 in).
By design, the pole mount does not allow the use of a
ush-mounted wall outlet.
1.5.3 MiniUSB Cable to MiniUSB (Straight/Angled)
Order no.: MX-CBL-MU-EN-STR-05/2/5
(straight/angled)
The MOBOTIX MX-232-IO-Box can be connected directly
to the M26 with this cable, which is up to ve meters long.
MX-M26-OPT-LCSG
MX-M26-OPT-LCGL
Only cables with
angled plugs can be
used for the M26
To Next Page
Loading...
