Mobotix Mx-M26B - Page 84

84
M26 Camera Manual: Operating the Camera
32 GB MicroSD Card: Storage Requirements
6 fps CIF 6 fps VGA 1 fps MEGA 1 fps QXGA
M-JPEG M-JPEG MxPEG M-JPEG M-JPEG
File size single image 15 kB 45 kB – 120 kB 240 kB
Storage required per second 90 kB 270 kB 75 kB 120 kB 240 kB
Storage required per 24 hrs 7.8 GB 23.5 GB 6.5 GB 10.4 GB 20.8 GB
Time for one full cycle 4 days 1.3 days 4.8 days 3 days 1.5 days
4 GB MicroSD Card: Storage Requirements
6 fps CIF 6 fps VGA 1 fps MEGA 1 fps QXGA
M-JPEG M-JPEG MxPEG M-JPEG M-JPEG
File size single image 15 kB 45 kB – 120 kB 240 kB
Storage required per second 90 kB 270 kB 75 kB 120 kB 240 kB
Storage required per 24 hrs 7.8 GB 23.5 GB 6.5 GB 10.4 GB 20.8 GB
Time for one full cycle 12 hours 4 hours 14.4 hours 9.2 hours 4.4 hours
Caution
The MicroSD card’s service life depends on production quality and frequency of use. Set
the type of recording (event-controlled or continuous recording, frame rate, resolution)
according to your specic requirements.
We recommend changing the pre-installed, high-quality MicroSD card once a year if you
have it constantly set to continuous recording.
Monitoring The Cell Wear Of Flash Storage Devices (Patent Pending)
MOBOTIX uses its own technology for this purpose
and has a pending patent. You can view the ash
wear in the status bar of the live image or by open-
ing Admin Menu > Camera Status. In addition,
the camera can also send a warning message (for
example, via e-mail) as soon as a critical error
is detected when data is written to the SD card
(Admin Menu > Error Notication Function.).
The MicroSD card can then be replaced to ensure
that any existing data is not lost.
All specications are based
on calculated averages