Mobotix Mx-M26B - Page 90

90
M26 Camera Manual: Operating the Camera
Basic Settings
• Administering the camera: You can modify the camera conguration in the Admin
Menu or the Setup Menu.
–
Admin Menu: This menu contains the basic conguration dialog boxes of the camera
(for example, passwords, interfaces, soware updates).
–
Setup Menu: This menu contains the dialog boxes for conguring the image, event
and recording parameters. Some of these settings can be changed using the cor-
responding Quick Controls in the live view.
• Resetting changes: If you would like to reset some larger changes in one dialog box
without resetting the complete conguration, you can use the Default button at the
bottom of the dialog box to reset only this dialog box’s settings to the factory defaults.
If you would like to reset all image settings, you can do so using the Manage Settings >
Restore Image Settings Quick Control in the live image of the camera.
• Storing changes permanently: Once you have nished conguring the camera, you
should always store the settings in the camera’s permanent memory. You can do so
in each dialog box (clicking on the Set button at the bottom of each dialog box will
temporarily implement the change; when you click Close, you will be asked to store
the complete conguration in the camera’s permanent memory) or in the Admin Menu
(Admin Menu > Store current conguration into ash memory). The Conguration
section of the Admin Menu provides more functions for storing, copying and managing
camera settings. For more information on this topic, refer to the online help for the
specic dialog boxes.
• Time tasks and time synchronization: Apart from a multitude of possibilities for con
-
trolling the camera using time (time tables, holiday and vacation, scheduled tasks,
etc.), the camera can also synchronize its internal clock. This allows you to manually
synchronize the camera with a computer or automatically using a time server or another
MOBOTIX camera. The camera can use either NTP time servers or Time Protocol servers.
For more information on this topic, refer to the online help for the specic dialog boxes.
• The “More” and “Less” buttons: When opening some of the camera dialog boxes,
the camera only shows the most important parameters. These dialog boxes have a
More button in the bottom right-hand corner. Click it to display additional options.
If all options are displayed, click on the Less button to hide the additional options.
User name: admin
password:
meinsm
Make sure to permanently
store changed parameters!
Automatic time synchroni-
zation using a time server
More: Display
advanced features
Less: Hide advanced
features