Mocom B CLASSIC - Page 41

39
EN
TECHNICAL MANUAL - B CLASSIC / B FUTURA / S CLASSIC
ALARMS
S 005
LCD Indication Alarm description Effect / Symptom
USB STICK error USB stick not inserted during the writing process.
Possible causes / Checks Solution
USB stick is not detected.
Ret USB stick.
Check USB stick proper formatting (up to 4G > FAT/16 Kbit/s – over 4G >
FAT32/16 Kbit/s).
Change USB stick.
USB card is damaged. Change the USB card.
The electronic card is damaged. Change the electronic card.
S 006
LCD Indication Alarm description Effect / Symptom
USB STICK NOT ACCESSIBLE USB stick not accessible (missing). Failure to access USB stick.
Possible causes / Checks Solution
USB stick is not detected.
Ret USB stick.
Check USB stick proper formatting (up to 4G > FAT/16 Kbit/s – over 4G >
FAT32/16 Kbit/s).
Change USB stick.
USB card is damaged. Change the USB card.
The electronic card is damaged. Change the electronic card.
S 007
LCD Indication Alarm description Effect / Symptom
USB STICK FULL USB stick full.
Possible causes / Checks Solution
USB memory full. Clear USB stick.
S 008
LCD Indication Alarm description Effect / Symptom
SD CARD NOT ACCESSIBLE Impossible to transfer data to SD card.
Possible causes / Checks Solution
USB stick is not detected.
Check SD Card proper installation.
Check SD Card proper locking.
Change the electronic card.
The electronic card is damaged. Change the electronic card.
S 009
LCD Indication Alarm description Effect / Symptom
NO PRINTER No connection with printer is detected.
Possible causes / Checks Solution
Printer/autoclave wiring not connected. Check wiring.
Printer off/not powered. Check printer power/switch-on.
The electronic card is damaged. Change the electronic card.
S 010
LCD Indication Alarm description Effect / Symptom
PRINTER: PAPER OUT
No paper/label roll is detected in
printer.
Possible causes / Checks Solution
Roll improperly installed.
Roll improperly positioned.
Check installation.
Check positioning.