Operating Instructions
Cable Types
Call up an interface to browse the library of known cable types, with the ability to load
associated settings such as Vp.
Cable Records
Call up an interface to browse the library of known cables, with the ability to load
associated settings such as Vp and also associated configurations that have previously
been used to scan a given cable.
Save Configurations
Call up interface to save a user configuration.
Add Scan Depth Config
Add a custom scan depth to memory. This option will create a custom scan depth, a
horizontal resolution for custom scans. The name, resolution, and units of the scan depth
can all be configured.
Load Scan Depth Config
Select this menu option to change the currently selected scan depth to any of those created
by the Add Scan Depth Config menu option. This scan depth will be used in subsequent
custom mode scans.
MENU button and top-level menu selections
If no menu is displayed, MENU loads the main top-level menu. If the top-level menu is
displayed, it closes the menu. If a submenu is displayed, it displays the parent menu. Top-
level menu selections are listed below.
Holding down the MENU button while pressing any button (or the M-FUNCTION knob) will
display a help dialog for that button's current menu selection.
Cable length selection
Use this selection for changing the pulse period to look at different lengths of cable. A
green “S,” “M,” or “L” appears near the upper right of the screen, depending upon which
mode is selected. If the letter is green, the settings are saved; if it is red, it has not been
saved; and if it is yellow, it is saving.
Short
Use this setting for accurate measurements of short cables of less than 200 feet in
length.
Medium
Use this setting for measurements of medium cables of less than 1000 feet in length.
Long
Use this setting for measurements of long cables of less than 4000 feet in length.
Mohr CT100 / CT100HF Operator's Manual 21
To Next Page
Loading...
