Operating Instructions
Show Temp Comp
This item toggles whether the status of the automatic temperature compensation is
displayed on the screen.
Power menu
Use this menu to adjust the power save options, the power display, and the battery
charging preference.
DC power save
This sets the inactivity timeout for power save mode while the device is running on its
24 VDC source.
DC shutdown
This sets the inactivity timeout before the device shuts down while running on its 24
VDC source.
Battery power save
This sets the inactivity timeout for power save mode while the device is running on
battery power (either internal or external).
Battery shutdown
This sets the inactivity timeout before the device shuts down while running on battery
power (either internal or external).
Power display
This selection shows or hides the on-screen power display.
Battery units
This selection toggles between voltage or battery voltage percent left.
Battery charge preference (charge internal/external)
This item overrides the automatic preference for the CT100 to charge the internal
battery first. When selected, the CT100 will charge the external battery until full before
switching to the internal battery.
Use external on/off
This toggles whether external battery information is displayed on the screen.
Connections
Use this menu to change the way the CT100 connects to external sources. This menu is
important for setting up the CT Viewer™ software. Items within this menu need only be
used if a CT100 is connected to a network via Ethernet.
Server select
This menu item creates a dialog box used to scroll through a list of CT Viewer™
connections. Chose a connection with the Select option and attempt to connect to
it. If the connection succeeds, a message appears on the CT Viewer™ screen, and
File->OpenTester will now show traces as stored on the connected tester. A connection
can be deleted from the list using the Delete menu option.
Mohr CT100 / CT100HF Operator's Manual 23
To Next Page
Loading...
