Operating Instructions
Hardware info
Display hardware information.
Usage
Display usage stats (hours, scans, storage, etc.).
Time
This menu allows a user to change time and date settings.
Set time zone
Change the time zone. Requires a reboot for changes to take effect.
Daylight savings on/off
Set whether the CT100 will automatically adjust for daylight savings time on the
appropriate dates. Requires a reboot for changes to take effect.
Time/Date
Set the current date and time.
Math
The Math menu contains frequently used mathematical operations. The items in this menu
are identical to those found in the Math submenu of the Scan menu
Set base (1)
Sets the currently selected trace as the base trace, used by other actions in the Math
menu that operate on more than one trace, such as Difference.
Difference
Creates a new trace that is the difference between the base trace (see Set base above)
and the currently selected trace.
1st derivative
Creates a new trace that is the first derivative of the currently selected trace.
FFT
Creates a new trace that is the Fast Fourier Transform of the currently selected trace,
using the data that lies between the cursors. The FFT is transformed using settings
from the FFT settings submenu.
FFT settings
Window
Selects the data window that is applied after padding the data but before the Fast
Fourier Transform.
Size
Selects the size of the data window. The data bounded by the cursors is padded
with stationary values to fill the window size.
Mohr CT100 / CT100HF Operator's Manual 31
To Next Page
Loading...
